QBOT PRO – EXPANSION KIT FOR QBOT BASIC SET
More about what‘s included inside of this expansion set
SENSORS AND OTHER PARTS
PRECISE SELECTION
QBOT PRO expansion kit consists of various sensors as well as additional 3D printed parts. All components are selected to highly increase the possibilities of basic QBOT set. Here‘s what is included inside the expansion kit:
Sensors and connection elements:
1x ultrasonic sensor HY-SRF05
1x APDS9960 universal sensor
1x bluetooth module HC05
2x photoresistors
2x IR sensors
1x 90 degree connector
10x F-M connection wires
10x F-F connection wires
Mechanical parts:
2x IR sensor cases
2x photoresistor cases
2x ultrasonic sensor cases
1x APDS9960 sensor case
1x bluetooth module case
1x front holder
1x rear holder
5x connection holder
30x M2x15 mm screws
12x M2 nuts
UNLIMITED POSSIBILITIES
VARIOUS COMBINATIONS
All mechanical parts in this kit are designed to increase the construction possibilities for the basic QBOT robot. All sensors can be mounted on the front or top of the robot in different positions and different angles. Even 2-3 sensors can be mounted and connected to the robot simultaneously.
INSTRUCTION
COMPREHENSIVE AND USEFUL
QBOT PRO set comes with a 40 page instruction which includes Arduino text programming codes and explanations, sensor connection circuits as well as additional programming assignments. Here‘s what can be found in the instruction:
– Getting ready for programming
– Digital LED control
– Reading push-button value
– Analog LED control
– Reading potentiometer value
– RGB LED control
– Piezoelectric buzzer control
– Controlling servo drives
– Ultrasonic sensor control
– Reading inertial sensor values
– Reading IR sensor value
– Reading light sensor value
– Reading APDS9960 sensor values
– Using bluetooth module
– 13x easy programming assignments
– 9x difficult programming assignments
– 2x team assignments